Maintaining the pristine condition of your X-Bond Microcement floors is crucial for their longevity and aesthetic appeal. At Protect Epoxy, we understand the importance of proper care and maintenance.
Below are our expert guidelines tailored for the two types of X-Bond sealers: Satin Stone and Natural Shield. If you’re unsure which method applies to your flooring, please contact us, your trusted installer in Sydney.
Maintenance Procedures for X-Bond Floors
Initial Care
Avoid washing the X-Bond surface for the first week following application, even with water. This precaution ensures the sealers dry and cure completely.
Regular Cleaning
Cleaning frequency and method can vary based on spill contents and foot traffic.
Microfiber cleaners and most household, commercial, or industrial detergents are suitable. Avoid any detergent with a solvent-based acetone concentration exceeding 50%.
For Satin Stone Sealed Surfaces
Use Stone Soap and common disinfectants as per the manufacturer’s instructions.
For outdoor areas, hosing down or using low- or high-pressure washing equipment is effective.
For Natural Shield Sealed Surfaces
Opt for low abrasive detergents or Stone Soap, following the manufacturer’s guidelines.
Similar to Satin Stone surfaces, outdoor areas can be cleaned with hosing or pressure washing equipment.
Furniture and Floor Protection
Use felt protectors under furniture to minimize scratching.
Workstation mats are recommended to prevent damage from office chairs.
Employ walk-off mats and rugs in high-traffic zones and entrances to trap dirt.
If using rubber mats or protectors, lift them regularly to clean underneath and prevent moisture buildup.
General Tips
- Keep floors free of sand, grit, or larger debris to avoid surface abrasion.
- A clean microfiber dust mop is highly effective for dirt removal.
- Promptly clean up all spills and semi-solids to prevent staining. Certain substances like nail polish remover, citrus, urine, and oil should be removed immediately.
- Steam mops are not recommended as they could affect the finish.
By following these guidelines, your X-Bond Microcement floors will retain their beauty and durability for years to come. Remember, proper maintenance is key to preserving the unique appeal of your flooring.
Photos courtesy of Seamless Imports
Contact Protect Epoxy - Your Sydney X-Bond Experts
For any additional guidance or professional services, remember that Protect Epoxy is one of the very few X-Bond trained installers in Sydney. We’re here to help you maintain the elegance and longevity of your X-Bond Microcement floors. Contact us today for expert advice and assistance.
